Wall Panel Forces Spreadsheet The power of RISA is the easy to access output. The Wall Panels have all the calculations and forces displayed in the Detail Report and now the new Wall Panel Forces gives you a quick way to get all the forces across the base of the wall. This new spreadsheet can be...
RISAFoundation has the ability to define different types of wall footings. You can define these from the Draw Wall Footings toolbar:
You may be familiar with the Internal Force Summation Tool (IFST) that is currently present in RISA-3D. However, a new tool has been added which allows you to click point to point within a wall and will only sum forces between these two points. Previously when using the IFST, forces were summed...
Let’s consider the example of the frame shown below. Suppose there is a diaphragm present at the framing level, and that the wall shown is intended only to handle the lateral loads. In reality the columns will be in-line with the wall, and the cantilever beams will pass over the wall without...
While RISA-3D does not currently have pilaster design, there are still plenty of situations where you would want to have a column embedded within a wall. The idea behind this is that the column handles the gravity loads for any beams which frame into it, while the wall handles lateral loads. No...
RISA-3D now has the ability to design concrete walls with openings for both in-plane and out of plane loading. For lintels we provide analysis results based on the finite element results of the region above the opening.
Below is a model of a concrete flat slab (represented by a plate) which is bearing on two columns and a skewed wall. As we know from plate meshing we will obviously have to submesh this slab in order to get accurate results. However if we do an ordinary submesh (as shown below) the plates will not...
